|Any headlight cleaning solution that comes in a "kit", generally uses outdated low tech polish and sandpaper, involves a lot of work and causes severe
unnecessary surface damage to your UV protective layer and lens.
Do your headlights need sandpaper? probably not.
Ask a forum parrot and they will tell you "YES, You have to wet sand and polish".
All the time knowing it is a short lived recovery.
Oxidation is a naturally occurring event and it will come back. We recommend VaporWax acrylic conditioner to maintain the clarity of your lens.
Once you start using abrasive kits as cleaners, there is no turning back. That method will destroy the surface of your headlights, guaranteed. These
people do not have your best interest in mind. They just want to seem knowledgeable about a subject that they are obviously oblivious to. In general these
people are mindless forum parrots repeating what they heard. The fact is this:
Different problems require different solutions.
There is no one method that is right for all problems.
UNLESS YOU ARE RESURFACING A LENS YOU DON'T NEED ABRASIVES OF ANY KIND. OXIDATION REMOVAL DOES NOT REQUIRE
RESURFACING, ANYONE THAT SAYS IT DOES, HASN'T A CLUE AS TO WHAT OXIDATION IS. GUARANTEED!
PURE LIQUID TARGET SPECIFIC SYSTEM
Acrylic Lens Restorer
Non abrasive, non flammable Acrylic Lens
Safely and instantly removes
heavy opaque acrylic oxidation
from headlights tail lights, solar panels,
emergency lights on contact.
ALR WILL NOT HARM PAINT.
There is nothing that removes acrylic oxidation
faster safer or more efficiently on Earth
Anyone can do it male, female,child or adult. No
special skills or tools needed.
YOU CAN TRY
BUT YOU WON'T FIND A BETTER ACRYLIC
AT ANY PRICE!
|We recommend you use one of our complete ALR APC 360ID Target specific system for optimum results
|Safe, fast, Easy, A 100% do it yourself (DIY) product, no special skill or tool needed
|TYPE VEHICLES, & OBJECTS PITTMAN ORIGINAL ALR, ALR*C APC 360ID REMOVE AND PREVENT OXIDATION FROM
Pittman's Original OneStep ALR and APC 360ID are specifically designed to deoxidize and condition the most heavily oxidized acrylic headlight
lens tail light and automotive acrylic paint on:
Ford, Lincoln, MGF, MGTF, Mercury, GM, Pontiac, Cadillac, Oldsmobile, Gulf Stream, Beech Craft, Peterbilt, Mac, Kenworth, Chevorlet, Buick,
Chrysler, Dodge, Plymouth, Porsche, Jeep, Jaguar, Nissan, Sterling, Subaru, Skoda, Smart, Ssangyong, TVR, Vauxhall, Lexus, Mercedes, Maserati,
Toyota, Kia, Geo, Peugeot, Saturn, Suzuki, Hyundai, Volvo, Volkswagen, Audi, Acura, BMW, X3, X5, X6, Mitsubishi, Mazda, Mini Cooper, Ferrari,
Cooper, Soarer, Altezza,Infiniti, FX35, FX45, FX50, G35, G37, Q45, Q50, Saab, Alfa Romeo, Aston Martin, Audi, BMW, Citroen, Daewoo, Daihatsu,
Ferrari, Fiat, Hummer, Isuzu, Lamborghini, Lancia, Land Rover, lada, Lotus, MX7, MX5, RX8, Perodua, Peugeot, Proton, Range Rover, Reliant,
Renault, Rolls Royce, Bentley Rover, Opel, Honda, Maxima, Camry, versa, titan, frontier, xterra, murano, pathfinder, armada, z, quest, altima,
tacoma, tundra, prius, matrix, yaris, corolla, four runner, highlander, RAV4, fj cruiser, sequoia, sienna, avalon, accord, civic, cr-v suv, odyssey, pilot,
gx, ngv, sedan, honda, element, ridgeline, s2ooo, fit, si coupe, mazda3, mazda5, mazda6, mx-5 miata, tribute, b-series truck.
This includes all plastic, acrylic, polycarbonate, projector headlights, head lights, headlamp, tail light, headlights, watches, clocks,., tail lamps,
light bar, convertible rear window, solar panels, boat and motorcycle windshields
FOR MORE DETAILED INFO GO TO OUR FREQUENTLY ASKED QUESTIONS (FAQ) PAGE
|NEVER TAKE ADVICE FROM SOMEONE WHO CANNOT TELL YOU THE DIFFERENCE BETWEEN UV DAMAGE AND OXIDATION.
OXIDATION DOES NOT CAUSE THE LENS TO TURN YELLOW
OXIDATION IS NOT CAUSED BY UV RAYS
DON'T BE FOOLED BY
OUT DATED PRE HISTORIC CAVEMAN SCIENCE
COMMON SENSE DICTATES
SANDPAPER WET OR DRY IS THE KISS OF DEATH TO YOUR HEADLIGHTS FACTORY FINISH AND PROTECTIVE UV LAYER
DESPITE WHAT YOU MAY HAVE READ IN INTERNET FORUMS AND ADVERTISEMENT FOR HEADLIGHT CLEANING KITS. THERE IS A DIFFERENCE
BETWEEN OXIDATION, UV DAMAGE AND SURFACE DAMAGE.
YOU NEED TO KNOW THE DIFFERENCE BETWEEN THE THREE.
Yellowing is caused by Ultra Violet rays from the sun.
With the UV layer intact the rays are effectively blocked from reaching the lens. The white oxidation which forms on top of the UV layer will turn yellow and brown from a
combination of ultra violet rays and contaminants.
THIS DOES NOT EFFECT THE LENS UNDERNEATH. THE CLARITY OF THIS LENS CAN BE FULLY RESTORED
However once this UV layer is severely damaged or removed
the Suns UV rays can reach the lens and cause it to turn yellow.
When this happens there is no recovery. The yellow will permeate the lens.
This yellowing is permanent.
At this point your lens will continue oxidize and now the lens is exposed to the effect of UV rays.
Now you have two problems.
Removing the surface oxidation will not remove the yellow tint in the lens nor can this yellow be sanded or polished away.
Once you choose to use abrasives on your lens,
THERE IS NO TURNING BACK,
you are trapped in a loosing battle against nature.
OXIDATION IS A NATURALLY OCCURRING EVENT, THERE IS NO ONE TIME FIX, IT WILL RETURN.
We recommend the use of our
ALR APC 360ID System
containing the acrylic conditioner VaporWax APC
for optimum results in extending clarity and resistance to oxidation
BUFFING, ELBOW GREASE COMPLEX INSTRUCTIONS SEALERS OR MULTIPLE STEPS. THE
APPLICATION IS EFFORTLESS. DEOXIDIZES ON CONTACT, ALR IS 100% PAINT SAFE, NO MASKING OFF NECESSARY.
SAVE YOUR HEADLIGHTS, TIME, AND MONEY
|DEOXIDIZE ACRYLIC, PLASTIC, VINYL, POLYCARBONATE, LEXAN, THERMOPLASTIC, PLEXIGLAS
|WHAT CONDITION ARE YOUR HEADLIGHTS IN?
OXIDIZED, CLOUDY, YELLOW, HAZY, FADED FOGGY, OR DAMAGED?
YOU WANT TO KNOW IF THEY CAN BE DEOXIDIZED OR DO THEY HAVE TO BE RESURFACED?
1. DO YOU SEE FLAKES PEELING OFF YOUR LENS?
2. DOES YOUR LENS APPEAR TO HAVE A THIN LAYER OF PLASTIC WEARING OFF THE SURFACE?
3. IS THE LENS DEEPLY PITTED?
4. ARE THERE SCRATCHES VISIBLE ON THE SURFACE OF THE LENS?
5. DOES THE LENS APPEAR TO HAVE THOUSANDS OF TINY MICRO FRACTURES IN IT?
THESE ARE CONDITIONS THAT GO BEYOND THE EFFECT OF NATURAL OXIDATION.
THESE LENS ARE DAMAGED AND CANNOT BE RESTORED TO CLARITY WITH DEOXIDATION ALONE.
THEY CAN BE RESURFACED WITH A COMPLEX SANDING AND POLISHING SYSTEM BUT NON OF THE HAND SANDING HEADLIGHT KITS HAVE WHAT IT TAKES TO REPAIR
THE DAMAGE DESCRIBED ABOVE.
On the other hand
1. IF YOUR LENS SURFACE IS CLOUDY.
2. IF THE SURFACE OF YOUR LENS ARE OPAQUE.
3. IF THE SURFACE OF YOUR LENS ARE WHITE.
4. IF THE SURFACE OF YOUR LENS ARE YELLOW.
5. IF THE SURFACE OF YOUR LENS ARE BROWN
6. IF THE SURFACE OF YOUR LENS IS FADED
7. IF THE SURFACE OF YOUR LENS IS HAZY,
YOUR PROBLEM MAY ONLY BE NATURAL OXIDATION
8. EVEN IF THE OXIDATION BUILD UP IS SO THICK ON YOUR LENS THAT NO LIGHT CAN COME THROUGH..
THEY CAN BE RESTORED TO FULL CLARITY IN SECONDS WITH PITTMAN ORIGINAL ALR OR ALR*C AND MAINTAINED WITH VAPORWAX APC 360ID
|VaporWax cannot repair damage but it can make even the most extreme damage, virtaully invisable in seconds. VaporWax is absorbed into the
paint giving the paint back some of the luster lost due to a polishing job disaster where the clear coat was peeled off in the process
|WRITE TO US AT PITTMAN KMOD PO BOX 178301 CHICAGO ILLINOIS 60617-8301